The configuration of Single Channel DCC In MSR Series

关键词:
功能需求

The configuration of Single Channel DCC In MSR Series

 

 

Keywords:MSR;ISDN;Circular DCC

I            Requirement for the diagram

Two MSR connected with E1, Apply Circular DCC.

Devices list: 2,MSR; 2,MIM-2E1; 1,E1;

CMW Version: version 5.20, Beta 1202P01, Standard

II          Network topology

Figure 1-1 Single Channel Circular DCC

III        Steps of configuration

RTA

#

 sysname rta

#

 //Set up dialer group 1, permit IP package, and trigger dial

 dialer-rule 1 ip permit

#             

controller E1 6/0

 pri-set

//Set this side clock to Master

 clock master

#

controller E1 6/1

#

interface Serial6/0:15

 link-protocol ppp

 ip address 10.1.1.1 255.255.255.0

 //Enable circular DCC on this interface

 dialer enable-circular

 //Set this interface to dialer group 1

 dialer-group 1

 //Set dialer number facing to the other side

 dialer number 6688012

 //Set this side to Network side

 isdn protocol-mode network

RTB

#

 sysname rtb

#

 dialer-rule 1 ip permit

#

vlan 1

#

controller E1 6/0

 pri-set

#

interface Serial6/0:15

 link-protocol ppp

 ip address 10.1.1.2 255.255.255.0

 dialer enable-circular

 dialer-group 1

 dialer number 6688011

IV       Key notes in the configuration

1) Set RTA to Master mode, RTB as default;

2) Set the ISDN protocol to network of interface Serial 6/0:15, RTB as default;

3) If there are other device between RTA and RTB, make sure to the woking mode of each interface, Master or Slave? Network or User.

V         Result Check

1) Ping the interface address of RTB from RTA, initiate dialer;

       [rta-Serial6/0:15]ping 10.1.1.2    

            PING 10.1.1.2: 56 data bytes, press CTRL_C to break

           Request time out

%Dec 22 11:23:28:388 2006 rta IFNET/4/UPDOWN:

            Line protocol on the interface Serial6/0:2 is UP

%Dec 22 11:23:28:398 2006 rta IFNET/4/UPDOWN:

            Protocol PPP IPCP on the interface Serial6/0:2 is UP

                Request time out

                Reply from 10.1.1.2: bytes=56 Sequence=3 ttl=255 time=26 ms

                Reply from 10.1.1.2: bytes=56 Sequence=4 ttl=255 time=26 ms

                Reply from 10.1.1.2: bytes=56 Sequence=5 ttl=255 time=25 ms

 

  --- 10.1.1.2 ping statistics ---

    5 packet(s) transmitted

    3 packet(s) received

    40.00% packet loss

    round-trip min/avg/max = 25/25/26 ms

2) Check tunnel interface state

[rta-Serial6/0:15]dis isdn call-info

Serial6/0:15(Network-side) :

  Link Layer 1: TEI = 0, State = MULTIPLE_FRAME_ESTABLISHED

  Network Layer: 1 connection(s)

    Connection 1 :

      CCIndex:0x0002 , State: Active , CES:1 , Channel:0x00000008

      TEI: 0

      Calling_Num[:Sub]: :

      Called_Num[:Sub]: 6688012:

 

案例信息

案例类型:典型配置
案例号:KMS - 15583
创建时间:2008年10月16日
更新时间:2008年10月20日
发布时间:2008/10/20 2:15:51
文章密级:游客可见
有效期:长期有效
发布者:张瑞 [z03731]
点击次数:78
评论平均得分:0
关键词:
产品线:中低端路由器
产品系列:
产品版本:
技术分类:拨号技术 L2tp

常用操作
收藏