在H3C S5024PV3-EI交换机上,可通过以下命令查看端口的Discard丢包计数:
1. 使用 `display interface X` 命令查看指定接口的统计信息,重点关注“Discard”字段,显示入/出方向丢包计数。
2. 若需深入分析丢包原因,可执行:
- `display packet-drop interface X`
查看丢包分类统计,包括:
- GBP full或带宽不足导致的丢包
- FFP过滤丢包
- STP非转发状态丢包等
建议结合上述命令综合判断端口是否存在异常丢包或错包。
display packet-drop interface X使用这个命令,提示不支持 <4F-E-1>dis packet-drop interface GigabitEthernet 1/0/1 The operation is not supported.
[4F-E-1]dis version H3C Comware Software, Version 7.1.070, Release 6126P20 交换机V7版,应该是可以使用这个命令的吧
查看接口的统计信息,没有Discard字段
<4F-E-1>dis int g1/0/4
GigabitEthernet1/0/4
Current state: UP
Line protocol state: UP
IP packet frame type: Ethernet II, hardware address: 80e4-5553-17a9
Description: GigabitEthernet1/0/4 Interface
Bandwidth: 10000 kbps
Loopback is not set
Media type is twisted pair
Port hardware type is 1000_BASE_T
10Mbps-speed mode, full-duplex mode
Link speed type is autonegotiation, link duplex type is autonegotiation
Flow-control is not enabled
Maximum frame length: 10240
Allow jumbo frames to pass
Broadcast max-ratio: 100%
Multicast max-ratio: 100%
Unicast max-ratio: 100%
PVID: 40
MDI type: Automdix
Port link-type: Access
Tagged VLANs: None
Untagged VLANs: 40
Port priority: 0
Last link flapping: 2 days 0 hours 58 minutes
Last clearing of counters: Never
Peak input rate: 4033255 bytes/sec, at 2013-10-26 08:01:02
Peak output rate: 11255246 bytes/sec, at 2013-06-28 23:46:36
Last 300 second input: 0 packets/sec 0 bytes/sec 0%
Last 300 second output: 21 packets/sec 2942 bytes/sec 0%
Input (total): 119196770 packets, 59399278039 bytes
112256696 unicasts, 929873 broadcasts, 6010201 multicasts, 0 pauses
Input (normal): 119196770 packets, - bytes
112256696 unicasts, 929873 broadcasts, 6010201 multicasts, 0 pauses
Input: 0 input errors, 0 runts, 0 giants, 0 throttles
0 CRC, 0 frame, - overruns, 0 aborts
- ignored, - parity errors
Output (total): 1217918207 packets, 884888118374 bytes
920090593 unicasts, 89162221 broadcasts, 208665393 multicasts, 0 pauses
Output (normal): 1217918207 packets, - bytes
920090593 unicasts, 89162221 broadcasts, 208665393 multicasts, 0 pauses
Output: 0 output errors, - underruns, - buffer failures
0 aborts, 0 deferred, 0 collisions, 0 late collisions
0 lost carrier, - no carrier
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
[4F-E-1]dis version H3C Comware Software, Version 7.1.070, Release 6126P20 交换机V7版,应该是可以使用这个命令的吧